<?xml version="1.0"?>
<!DOCTYPE decoder-config SYSTEM "decoder-config.dtd">
<!-- $Id: TD_SIC24.xml,v 1.3 2005/12/13 23:25:41 robinson Exp $ -->
<decoder-config>
		<version author="td@teamdigital1.com" 
					version="1.1" lastUpdated="20060223"/>
					
		<!-- Version 1 inital release 12/13/05-->
		<!-- Version 1.1 release 2/23/06 - correct logic cell 3 -->
		
<decoder>
	<family name="SIC24" mfg="Team Digital" type="stationary"
				comment="SIC24 is not stationary decoder, but it can be programmed in the usual way">
			<model model= "SIC24" lowVersionID="12"/>
		</family>

	<programming direct="no" paged="yes" 
	                     register="no" ops="yes"></programming>

	<variables>
		<variable label="Output Addresses" CV="1" mask="VVVVVVVV" default="101"
			tooltip="Range 1-2040">
			<splitVal highCV="9" upperMask="XXXXVVVV"/> </variable>
			
		<variable label="through"  CV="1" mask="VVVVVVVV" default="124" >
			<splitVal highCV="9" factor="1" offset="23" /> </variable>
		
 		<variable label="Option 1" CV="2" mask="XXXXXXXV" item="Op1"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Option 2" CV="2" mask="XXXXXXVX" item="Op2"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Option 3" CV="2" mask="XXXXXVXX" item="Op3"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
 		<variable label="Option 4" CV="2" mask="XXXXVXXX" item="Op4"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
 
 		<variable label="CV2" CV="2" mask="VVVVVVVV">
 			<decVal/> </variable>		
 		<variable label="Version ID" CV="3" item="Decoder Version">
				<decVal/> </variable>
		<variable label="Manufacturer ID" CV="4" item="Manufacturer" default="25">
				<decVal/> </variable>

 
 		<variable label="Ops Mode Address" CV="5" mask="VVVVVVVV" item="Short Address" 
			tooltip="Range 1-16000">
			<splitVal highCV="6" upperMask="XXVVVVVV"/>
			</variable>
			
		<variable label="Short Address" CV="1"> <decVal/> </variable>
 
 		<variable label="SE8C address factor" CV="7" mask="XXXVVVVV"> <decVal/> </variable>

		<variable label="Primary Address 1" CV="10" mask="VVVVVVVV">
			<splitVal highCV="11" max="7" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="11" mask="VXXXXXXX" item="Inv P1" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Primary Type 1" CV="11" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal> </variable>
		<variable label="Primary Transition 1" CV="12" mask="XXXXXXVV">
			<enumVal>
				<enumChoice choice="No Primary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal> </variable>
		<variable label="Secondary Address 1" CV="13" mask="VVVVVVVV">
			<splitVal highCV="14" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Invert" CV="14" mask="VXXXXXXX" item="Inv S1" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Secondary Type 1" CV="14" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal> </variable>
		<variable label="Secondary Transition 1" CV="12" mask="XXXXVVXX">
			<enumVal>
				<enumChoice choice="No Secondary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal> </variable>
		
		<variable label="Primary Address 2" CV="15" mask="VVVVVVVV">
			<splitVal highCV="16" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Invert" CV="16" mask="VXXXXXXX" item="Inv P2" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Primary Type 2" CV="16" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal>
			</variable>
		<variable label="Primary Transition 2" CV="17" mask="XXXXXXVV">
			<enumVal>
				<enumChoice choice="No Primary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal>
			</variable>
		<variable label="Secondary Address 2" CV="18" mask="VVVVVVVV">
			<splitVal highCV="19" upperMask="XXXXVVVV"/>
			</variable>	
			<variable label="Invert" CV="19" mask="VXXXXXXX" item="Inv S2" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Secondary Type 2" CV="19" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal>
			</variable>
		<variable label="Secondary Transition 2" CV="17" mask="XXXXVVXX">
			<enumVal>
				<enumChoice choice="No Secondary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal>
			</variable>
		
		<variable label="Primary Address 3" CV="20" mask="VVVVVVVV">
			<splitVal highCV="21" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Invert" CV="21" mask="VXXXXXXX" item="Inv P3" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Primary Type 3" CV="21" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal>
			</variable>
		<variable label="Primary Transition 3" CV="22" mask="XXXXXXVV">
			<enumVal>
				<enumChoice choice="No Primary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal>
			</variable>
		<variable label="Secondary Address 3" CV="23" mask="VVVVVVVV">
			<splitVal highCV="24" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Invert" CV="24" mask="VXXXXXXX" item="Inv S3" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Secondary Type 3" CV="24" mask="XXVVXXXX">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
			<enumChoice choice="Sensor Message"/><enumChoice choice="Reserved (0x4X)"/> </enumVal> </variable>
		<variable label="Secondary Transition 3" CV="22" mask="XXXXVVXX">
			<enumVal> <enumChoice choice="No Secondary Message"/> <enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/> <enumChoice choice="Send on Both Edges"/> </enumVal> </variable>

		<variable label="Primary Address 4" CV="25" mask="VVVVVVVV">
			<splitVal highCV="26" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="26" mask="VXXXXXXX" item="Inv P4" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Primary Type 4" CV="26" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal> </variable>
		<variable label="Primary Transition 4" CV="27" mask="XXXXXXVV">
			<enumVal>
				<enumChoice choice="No Primary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal> </variable>
		<variable label="Secondary Address 4" CV="28" mask="VVVVVVVV">
			<splitVal highCV="29" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="29" mask="VXXXXXXX" item="Inv S4" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Secondary Type 4" CV="29" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal>
			</variable>
		<variable label="Secondary Transition 4" CV="27" mask="XXXXVVXX">
			<enumVal>
				<enumChoice choice="No Secondary Message"/>
				<enumChoice choice="Send on Positive Edge"/>
				<enumChoice choice="Send on Negative Edge"/>
				<enumChoice choice="Send on Both Transitions"/>
				</enumVal>
			</variable>
			
		<variable label="Primary Address 5" CV="30" mask="VVVVVVVV">
			<splitVal highCV="31" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="31" mask="VXXXXXXX" item="Inv P5" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Primary Type 5" CV="31" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal> </variable>
		<variable label="Primary Transition 5" CV="32" mask="XXXXXXVV">
			<enumVal>
				<enumChoice choice="No Primary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal> </variable>
		<variable label="Secondary Address 5" CV="33" mask="VVVVVVVV">
			<splitVal highCV="34" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="34" mask="VXXXXXXX" item="Inv S5" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Secondary Type 5" CV="34" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal>
			</variable>
		<variable label="Secondary Transition 5" CV="32" mask="XXXXVVXX">
			<enumVal>
				<enumChoice choice="No Secondary Message"/>
				<enumChoice choice="Send on Positive Edge"/>
				<enumChoice choice="Send on Negative Edge"/>
				<enumChoice choice="Send on Both Transitions"/>
				</enumVal>
			</variable>
			
		<variable label="Primary Address 6" CV="35" mask="VVVVVVVV">
			<splitVal highCV="36" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="36" mask="VXXXXXXX" item="Inv P6" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Primary Type 6" CV="36" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal> </variable>
		<variable label="Primary Transition 6" CV="37" mask="XXXXXXVV">
			<enumVal>
				<enumChoice choice="No Primary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal> </variable>
		<variable label="Secondary Address 6" CV="38" mask="VVVVVVVV">
			<splitVal highCV="39" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="39" mask="VXXXXXXX" item="Inv S6" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Secondary Type 6" CV="39" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal>
			</variable>
		<variable label="Secondary Transition 6" CV="37" mask="XXXXVVXX">
			<enumVal>
				<enumChoice choice="No Secondary Message"/>
				<enumChoice choice="Send on Positive Edge"/>
				<enumChoice choice="Send on Negative Edge"/>
				<enumChoice choice="Send on Both Transitions"/>
				</enumVal>
			</variable>
			
		<variable label="Primary Address 7" CV="40" mask="VVVVVVVV">
			<splitVal highCV="41" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="41" mask="VXXXXXXX" item="Inv P7" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Primary Type 7" CV="41" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal> </variable>
		<variable label="Primary Transition 7" CV="42" mask="XXXXXXVV">
			<enumVal>
				<enumChoice choice="No Primary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal> </variable>
		<variable label="Secondary Address 7" CV="43" mask="VVVVVVVV">
			<splitVal highCV="44" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="44" mask="VXXXXXXX" item="Inv S7" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Secondary Type 7" CV="44" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal>
			</variable>
		<variable label="Secondary Transition 7" CV="42" mask="XXXXVVXX">
			<enumVal>
				<enumChoice choice="No Secondary Message"/>
				<enumChoice choice="Send on Positive Edge"/>
				<enumChoice choice="Send on Negative Edge"/>
				<enumChoice choice="Send on Both Transitions"/>
				</enumVal>
			</variable>
			
		<variable label="Primary Address 8" CV="45" mask="VVVVVVVV">
			<splitVal highCV="46" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="46" mask="VXXXXXXX" item="Inv P8" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Primary Type 8" CV="46" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal> </variable>
		<variable label="Primary Transition 8" CV="47" mask="XXXXXXVV">
			<enumVal>
				<enumChoice choice="No Primary Message"/>
				<enumChoice choice="Send on Rising Edge"/>
				<enumChoice choice="Send on Falling Edge"/>
				<enumChoice choice="Send on Both Edges"/>
				</enumVal> </variable>
		<variable label="Secondary Address 8" CV="48" mask="VVVVVVVV">
			<splitVal highCV="49" upperMask="XXXXVVVV"/> </variable>
		<variable label="Invert" CV="49" mask="VXXXXXXX" item="Inv S8" > <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Secondary Type 8" CV="49" mask="XXVVXXXX">
			<enumVal>
				<enumChoice choice="Switch Request"/>
				<enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/>
				<enumChoice choice="Reserved (0x4X)"/>
				</enumVal>
			</variable>
		<variable label="Secondary Transition 8" CV="47" mask="XXXXVVXX">
			<enumVal>
				<enumChoice choice="No Secondary Message"/>
				<enumChoice choice="Send on Positive Edge"/>
				<enumChoice choice="Send on Negative Edge"/>
				<enumChoice choice="Send on Both Transitions"/>
				</enumVal>
			</variable>
	
		<variable label="Element A Address" CV="50" mask="VVVVVVVV" item="Address 1A">
			<splitVal highCV="51" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="51" mask="XXVVXXXX" item="Message 1A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="51" mask="XVXXXXXX" item="State 1A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="52" mask="VVVVVVVV" item="Address 1B">
			<splitVal highCV="53" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="53" mask="XXVVXXXX" item="Message 1B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="53" mask="XVXXXXXX" item="State 1B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="53" mask="VXXXXXXX" item="Logic 1B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="54" mask="VVVVVVVV" item="Address 1C">
			<splitVal highCV="55" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="55" mask="XXVVXXXX" item="Message 1C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="55" mask="XVXXXXXX" item="State 1C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="55" mask="VXXXXXXX" item="Logic 1C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="56" mask="XVVXXXXX" item="BiC1">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="56" mask="VXXXXXXX" item="Inv o1">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="56" mask="XXXXXVXX" item="Recip1"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="56" mask="XXXVVXXX" item="Eff1">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="56" mask="XXXXXXVV" item="EffDu1">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
			
		<variable label="Element A Address" CV="57" mask="VVVVVVVV" item="Address 2A">
			<splitVal highCV="58" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="58" mask="XXVVXXXX" item="Message 2A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="58" mask="XVXXXXXX" item="State 2A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="59" mask="VVVVVVVV" item="Address 2B">
			<splitVal highCV="60" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="60" mask="XXVVXXXX" item="Message 2B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="60" mask="XVXXXXXX" item="State 2B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="60" mask="VXXXXXXX" item="Logic 2B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="61" mask="VVVVVVVV" item="Address 2C">
			<splitVal highCV="62" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="62" mask="XXVVXXXX" item="Message 2C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="62" mask="XVXXXXXX" item="State 2C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="62" mask="VXXXXXXX" item="Logic 2C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="63" mask="XVVXXXXX" item="BiC2">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="63" mask="VXXXXXXX" item="Inv o2">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="63" mask="XXXXXVXX" item="Recip2"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="63" mask="XXXVVXXX" item="Eff2">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="63" mask="XXXXXXVV" item="EffDu2">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
			
			<variable label="Element A Address" CV="64" mask="VVVVVVVV" item="Address 3A">
			<splitVal highCV="65" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="65" mask="XXVVXXXX" item="Message 3A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="65" mask="XVXXXXXX" item="State 3A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="66" mask="VVVVVVVV" item="Address 3B">
			<splitVal highCV="67" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="67" mask="XXVVXXXX" item="Message 3B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="67" mask="XVXXXXXX" item="State 3B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="67" mask="VXXXXXXX" item="Logic 3B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="68" mask="VVVVVVVV" item="Address 3C">
			<splitVal highCV="69" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="69" mask="XXVVXXXX" item="Message 3C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="69" mask="XVXXXXXX" item="State 3C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="69" mask="VXXXXXXX" item="Logic 3C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="70" mask="XVVXXXXX" item="BiC3">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="70" mask="VXXXXXXX" item="Inv o3">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="70" mask="XXXXXVXX" item="Recip3"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="70" mask="XXXVVXXX" item="Eff3">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="70" mask="XXXXXXVV" item="EffDu3">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
			
		<variable label="Element A Address" CV="71" mask="VVVVVVVV" item="Address 4A">
			<splitVal highCV="72" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="72" mask="XXVVXXXX" item="Message 4A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="72" mask="XVXXXXXX" item="State 4A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="73" mask="VVVVVVVV" item="Address 4B">
			<splitVal highCV="74" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="74" mask="XXVVXXXX" item="Message 4B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="74" mask="XVXXXXXX" item="State 4B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="74" mask="VXXXXXXX" item="Logic 4B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="75" mask="VVVVVVVV" item="Address 4C">
			<splitVal highCV="76" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="76" mask="XXVVXXXX" item="Message 4C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="76" mask="XVXXXXXX" item="State 4C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="76" mask="VXXXXXXX" item="Logic 4C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="77" mask="XVVXXXXX" item="BiC4">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="77" mask="VXXXXXXX" item="Inv o4">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="77" mask="XXXXXVXX" item="Recip4"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="77" mask="XXXVVXXX" item="Eff4">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="77" mask="XXXXXXVV" item="EffDu4">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
			
			<variable label="Element A Address" CV="78" mask="VVVVVVVV" item="Address 5A">
			<splitVal highCV="79" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="79" mask="XXVVXXXX" item="Message 5A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="79" mask="XVXXXXXX" item="State 5A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="80" mask="VVVVVVVV" item="Address 5B">
			<splitVal highCV="81" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="81" mask="XXVVXXXX" item="Message 5B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="81" mask="XVXXXXXX" item="State 5B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="81" mask="VXXXXXXX" item="Logic 5B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="82" mask="VVVVVVVV" item="Address 5C">
			<splitVal highCV="83" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="83" mask="XXVVXXXX" item="Message 5C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="83" mask="XVXXXXXX" item="State 5C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="83" mask="VXXXXXXX" item="Logic 5C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="84" mask="XVVXXXXX" item="BiC5">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="84" mask="VXXXXXXX" item="Inv o5">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="84" mask="XXXXXVXX" item="Recip5"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="84" mask="XXXVVXXX" item="Eff5">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="84" mask="XXXXXXVV" item="EffDu5">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
		<variable label="Element A Address" CV="85" mask="VVVVVVVV" item="Address 6A">
			<splitVal highCV="86" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="86" mask="XXVVXXXX" item="Message 6A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="86" mask="XVXXXXXX" item="State 6A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="87" mask="VVVVVVVV" item="Address 6B">
			<splitVal highCV="88" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="88" mask="XXVVXXXX" item="Message 6B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="88" mask="XVXXXXXX" item="State 6B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="88" mask="VXXXXXXX" item="Logic 6B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="89" mask="VVVVVVVV" item="Address 6C">
			<splitVal highCV="90" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="90" mask="XXVVXXXX" item="Message 6C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="90" mask="XVXXXXXX" item="State 6C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="90" mask="VXXXXXXX" item="Logic 6C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="91" mask="XVVXXXXX" item="BiC6">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="91" mask="VXXXXXXX" item="Inv o6">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="91" mask="XXXXXVXX" item="Recip6"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="91" mask="XXXVVXXX" item="Eff6">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="91" mask="XXXXXXVV" item="EffDu6">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
			
			<variable label="Element A Address" CV="92" mask="VVVVVVVV" item="Address 7A">
			<splitVal highCV="93" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="93" mask="XXVVXXXX" item="Message 7A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="93" mask="XVXXXXXX" item="State 7A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="94" mask="VVVVVVVV" item="Address 7B">
			<splitVal highCV="95" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="95" mask="XXVVXXXX" item="Message 7B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="95" mask="XVXXXXXX" item="State 7B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="95" mask="VXXXXXXX" item="Logic 7B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="96" mask="VVVVVVVV" item="Address 7C">
			<splitVal highCV="97" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="97" mask="XXVVXXXX" item="Message 7C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="97" mask="XVXXXXXX" item="State 7C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="97" mask="VXXXXXXX" item="Logic 7C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="98" mask="XVVXXXXX" item="BiC7">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="98" mask="VXXXXXXX" item="Inv o7">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="98" mask="XXXXXVXX" item="Recip7"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="98" mask="XXXVVXXX" item="Eff7">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="98" mask="XXXXXXVV" item="EffDu7">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
			<variable label="Element A Address" CV="99" mask="VVVVVVVV" item="Address 8A">
			<splitVal highCV="100" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="100" mask="XXVVXXXX" item="Message 8A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="100" mask="XVXXXXXX" item="State 8A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="101" mask="VVVVVVVV" item="Address 8B">
			<splitVal highCV="102" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="102" mask="XXVVXXXX" item="Message 8B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="102" mask="XVXXXXXX" item="State 8B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="102" mask="VXXXXXXX" item="Logic 8B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="103" mask="VVVVVVVV" item="Address 8C">
			<splitVal highCV="104" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="104" mask="XXVVXXXX" item="Message 8C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="104" mask="XVXXXXXX" item="State 8C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="104" mask="VXXXXXXX" item="Logic 8C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="105" mask="XVVXXXXX" item="BiC8">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="105" mask="VXXXXXXX" item="Inv o8">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="105" mask="XXXXXVXX" item="Recip8"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="105" mask="XXXVVXXX" item="Eff8">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="105" mask="XXXXXXVV" item="EffDu8">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
			<variable label="Element A Address" CV="106" mask="VVVVVVVV" item="Address 9A">
			<splitVal highCV="107" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="107" mask="XXVVXXXX" item="Message 9A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="107" mask="XVXXXXXX" item="State 9A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="108" mask="VVVVVVVV" item="Address 9B">
			<splitVal highCV="109" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="109" mask="XXVVXXXX" item="Message 9B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="109" mask="XVXXXXXX" item="State 9B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="109" mask="VXXXXXXX" item="Logic 9B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="110" mask="VVVVVVVV" item="Address 9C">
			<splitVal highCV="111" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="111" mask="XXVVXXXX" item="Message 9C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="111" mask="XVXXXXXX" item="State 9C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="111" mask="VXXXXXXX" item="Logic 9C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="112" mask="XVVXXXXX" item="BiC9">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="112" mask="VXXXXXXX" item="Inv o9">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="112" mask="XXXXXVXX" item="Recip9"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="112" mask="XXXVVXXX" item="Eff9">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="112" mask="XXXXXXVV" item="EffDu9">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
			<variable label="Element A Address" CV="113" mask="VVVVVVVV" item="Address 10A">
			<splitVal highCV="114" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="114" mask="XXVVXXXX" item="Message 10A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="114" mask="XVXXXXXX" item="State 10A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="115" mask="VVVVVVVV" item="Address 10B">
			<splitVal highCV="116" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="116" mask="XXVVXXXX" item="Message 10B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="116" mask="XVXXXXXX" item="State 10B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="116" mask="VXXXXXXX" item="Logic 10B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="117" mask="VVVVVVVV" item="Address 10C">
			<splitVal highCV="118" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="118" mask="XXVVXXXX" item="Message 10C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="118" mask="XVXXXXXX" item="State 10C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="118" mask="VXXXXXXX" item="Logic 10C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="119" mask="XVVXXXXX" item="BiC10">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="119" mask="VXXXXXXX" item="Inv o10">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="119" mask="XXXXXVXX" item="Recip10"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="119" mask="XXXVVXXX" item="Eff10">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="119" mask="XXXXXXVV" item="EffDu10">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
			<variable label="Element A Address" CV="120" mask="VVVVVVVV" item="Address 11A">
			<splitVal highCV="121" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="121" mask="XXVVXXXX" item="Message 11A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="121" mask="XVXXXXXX" item="State 11A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="122" mask="VVVVVVVV" item="Address 11B">
			<splitVal highCV="123" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="123" mask="XXVVXXXX" item="Message 11B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="123" mask="XVXXXXXX" item="State 11B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="123" mask="VXXXXXXX" item="Logic 11B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="124" mask="VVVVVVVV" item="Address 11C">
			<splitVal highCV="125" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="125" mask="XXVVXXXX" item="Message 11C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="125" mask="XVXXXXXX" item="State 11C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="125" mask="VXXXXXXX" item="Logic 11C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="126" mask="XVVXXXXX" item="BiC11">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="126" mask="VXXXXXXX" item="Inv o11">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="126" mask="XXXXXVXX" item="Recip11"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="126" mask="XXXVVXXX" item="Eff11">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="126" mask="XXXXXXVV" item="EffDu11">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
			<variable label="Element A Address" CV="127" mask="VVVVVVVV" item="Address 12A">
			<splitVal highCV="128" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="128" mask="XXVVXXXX" item="Message 12A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="128" mask="XVXXXXXX" item="State 12A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="129" mask="VVVVVVVV" item="Address 12B">
			<splitVal highCV="130" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="130" mask="XXVVXXXX" item="Message 12B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="130" mask="XVXXXXXX" item="State 12B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="130" mask="VXXXXXXX" item="Logic 12B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="131" mask="VVVVVVVV" item="Address 12C">
			<splitVal highCV="132" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="132" mask="XXVVXXXX" item="Message 12C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="132" mask="XVXXXXXX" item="State 12C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="132" mask="VXXXXXXX" item="Logic 12C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="133" mask="XVVXXXXX" item="BiC12">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="133" mask="VXXXXXXX" item="Inv o12">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="133" mask="XXXXXVXX" item="Recip12"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="133" mask="XXXVVXXX" item="Eff12">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="133" mask="XXXXXXVV" item="EffDu12">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
		<variable label="Element A Address" CV="134" mask="VVVVVVVV" item="Address 13A">
			<splitVal highCV="135" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="135" mask="XXVVXXXX" item="Message 13A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="135" mask="XVXXXXXX" item="State 13A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="136" mask="VVVVVVVV" item="Address 13B">
			<splitVal highCV="137" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="137" mask="XXVVXXXX" item="Message 13B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="137" mask="XVXXXXXX" item="State 13B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="137" mask="VXXXXXXX" item="Logic 13B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="138" mask="VVVVVVVV" item="Address 13C">
			<splitVal highCV="139" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="139" mask="XXVVXXXX" item="Message 13C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="139" mask="XVXXXXXX" item="State 13C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="139" mask="VXXXXXXX" item="Logic 13C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="140" mask="XVVXXXXX" item="BiC13">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="140" mask="VXXXXXXX" item="Inv o13">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="140" mask="XXXXXVXX" item="Recip13"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="140" mask="XXXVVXXX" item="Eff13">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="140" mask="XXXXXXVV" item="EffDu13">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
		<variable label="Element A Address" CV="141" mask="VVVVVVVV" item="Address 14A">
			<splitVal highCV="142" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="142" mask="XXVVXXXX" item="Message 14A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="142" mask="XVXXXXXX" item="State 14A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="143" mask="VVVVVVVV" item="Address 14B">
			<splitVal highCV="144" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="144" mask="XXVVXXXX" item="Message 14B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="144" mask="XVXXXXXX" item="State 14B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="144" mask="VXXXXXXX" item="Logic 14B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="145" mask="VVVVVVVV" item="Address 14C">
			<splitVal highCV="146" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="146" mask="XXVVXXXX" item="Message 14C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="146" mask="XVXXXXXX" item="State 14C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="146" mask="VXXXXXXX" item="Logic 14C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="147" mask="XVVXXXXX" item="BiC14">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="147" mask="VXXXXXXX" item="Inv o14">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="147" mask="XXXXXVXX" item="Recip14"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="147" mask="XXXVVXXX" item="Eff14">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="147" mask="XXXXXXVV" item="EffDu14">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>

		<variable label="Element A Address" CV="148" mask="VVVVVVVV" item="Address 15A">
			<splitVal highCV="149" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="149" mask="XXVVXXXX" item="Message 15A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="149" mask="XVXXXXXX" item="State 15A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="150" mask="VVVVVVVV" item="Address 15B">
			<splitVal highCV="151" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="151" mask="XXVVXXXX" item="Message 15B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="151" mask="XVXXXXXX" item="State 15B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="151" mask="VXXXXXXX" item="Logic 15B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="152" mask="VVVVVVVV" item="Address 15C">
			<splitVal highCV="153" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="153" mask="XXVVXXXX" item="Message 15C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="153" mask="XVXXXXXX" item="State 15C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="153" mask="VXXXXXXX" item="Logic 15C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="154" mask="XVVXXXXX" item="BiC15">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="154" mask="VXXXXXXX" item="Inv o15">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="154" mask="XXXXXVXX" item="Recip15"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="154" mask="XXXVVXXX" item="Eff15">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="154" mask="XXXXXXVV" item="EffDu15">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>

		<variable label="Element A Address" CV="155" mask="VVVVVVVV" item="Address 16A">
			<splitVal highCV="156" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="156" mask="XXVVXXXX" item="Message 16A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="156" mask="XVXXXXXX" item="State 16A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="157" mask="VVVVVVVV" item="Address 16B">
			<splitVal highCV="158" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="158" mask="XXVVXXXX" item="Message 16B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="158" mask="XVXXXXXX" item="State 16B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="158" mask="VXXXXXXX" item="Logic 16B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="159" mask="VVVVVVVV" item="Address 16C">
			<splitVal highCV="160" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="160" mask="XXVVXXXX" item="Message 16C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="160" mask="XVXXXXXX" item="State 16C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="160" mask="VXXXXXXX" item="Logic 16C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="161" mask="XVVXXXXX" item="BiC16">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="161" mask="VXXXXXXX" item="Inv o16">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="161" mask="XXXXXVXX" item="Recip16"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="161" mask="XXXVVXXX" item="Eff16">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="161" mask="XXXXXXVV" item="EffDu16">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
		<variable label="Element A Address" CV="162" mask="VVVVVVVV" item="Address 17A">
			<splitVal highCV="163" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="163" mask="XXVVXXXX" item="Message 17A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="163" mask="XVXXXXXX" item="State 17A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="164" mask="VVVVVVVV" item="Address 17B">
			<splitVal highCV="165" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="165" mask="XXVVXXXX" item="Message 17B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="165" mask="XVXXXXXX" item="State 17B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="165" mask="VXXXXXXX" item="Logic 17B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="166" mask="VVVVVVVV" item="Address 17C">
			<splitVal highCV="167" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="167" mask="XXVVXXXX" item="Message 17C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="167" mask="XVXXXXXX" item="State 17C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="167" mask="VXXXXXXX" item="Logic 17C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="168" mask="XVVXXXXX" item="BiC17">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="168" mask="VXXXXXXX" item="Inv o17">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="168" mask="XXXXXVXX" item="Recip17"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="168" mask="XXXVVXXX" item="Eff17">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="168" mask="XXXXXXVV" item="EffDu17">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
		<variable label="Element A Address" CV="169" mask="VVVVVVVV" item="Address 18A">
			<splitVal highCV="170" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="170" mask="XXVVXXXX" item="Message 18A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="170" mask="XVXXXXXX" item="State 18A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="171" mask="VVVVVVVV" item="Address 18B">
			<splitVal highCV="172" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="172" mask="XXVVXXXX" item="Message 18B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="172" mask="XVXXXXXX" item="State 18B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="172" mask="VXXXXXXX" item="Logic 18B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="173" mask="VVVVVVVV" item="Address 18C">
			<splitVal highCV="174" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="174" mask="XXVVXXXX" item="Message 18C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="174" mask="XVXXXXXX" item="State 18C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="174" mask="VXXXXXXX" item="Logic 18C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="175" mask="XVVXXXXX" item="BiC18">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="175" mask="VXXXXXXX" item="Inv o18">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="175" mask="XXXXXVXX" item="Recip18"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="175" mask="XXXVVXXX" item="Eff18">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="175" mask="XXXXXXVV" item="EffDu18">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>

		<variable label="Element A Address" CV="176" mask="VVVVVVVV" item="Address 19A">
			<splitVal highCV="177" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="177" mask="XXVVXXXX" item="Message 19A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="177" mask="XVXXXXXX" item="State 19A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="178" mask="VVVVVVVV" item="Address 19B">
			<splitVal highCV="179" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="179" mask="XXVVXXXX" item="Message 19B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="179" mask="XVXXXXXX" item="State 19B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="179" mask="VXXXXXXX" item="Logic 19B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="180" mask="VVVVVVVV" item="Address 19C">
			<splitVal highCV="181" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="181" mask="XXVVXXXX" item="Message 19C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="181" mask="XVXXXXXX" item="State 19C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="181" mask="VXXXXXXX" item="Logic 19C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="182" mask="XVVXXXXX" item="BiC19">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="182" mask="VXXXXXXX" item="Inv o19">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="182" mask="XXXXXVXX" item="Recip19"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="182" mask="XXXVVXXX" item="Eff19">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="182" mask="XXXXXXVV" item="EffDu19">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>

		<variable label="Element A Address" CV="183" mask="VVVVVVVV" item="Address 20A">
			<splitVal highCV="184" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="184" mask="XXVVXXXX" item="Message 20A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="184" mask="XVXXXXXX" item="State 20A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="185" mask="VVVVVVVV" item="Address 20B">
			<splitVal highCV="186" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="186" mask="XXVVXXXX" item="Message 20B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="186" mask="XVXXXXXX" item="State 20B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="186" mask="VXXXXXXX" item="Logic 20B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="187" mask="VVVVVVVV" item="Address 20C">
			<splitVal highCV="188" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="188" mask="XXVVXXXX" item="Message 20C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="188" mask="XVXXXXXX" item="State 20C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="188" mask="VXXXXXXX" item="Logic 20C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="189" mask="XVVXXXXX" item="BiC20">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="189" mask="VXXXXXXX" item="Inv o20">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="189" mask="XXXXXVXX" item="Recip20"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="189" mask="XXXVVXXX" item="Eff20">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="189" mask="XXXXXXVV" item="EffDu20">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>
	
		<variable label="Element A Address" CV="190" mask="VVVVVVVV" item="Address 21A">
			<splitVal highCV="191" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="191" mask="XXVVXXXX" item="Message 21A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="191" mask="XVXXXXXX" item="State 21A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="192" mask="VVVVVVVV" item="Address 21B">
			<splitVal highCV="193" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="193" mask="XXVVXXXX" item="Message 21B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="193" mask="XVXXXXXX" item="State 21B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="193" mask="VXXXXXXX" item="Logic 21B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="194" mask="VVVVVVVV" item="Address 21C">
			<splitVal highCV="195" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="195" mask="XXVVXXXX" item="Message 21C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="195" mask="XVXXXXXX" item="State 21C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="195" mask="VXXXXXXX" item="Logic 21C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="196" mask="XVVXXXXX" item="BiC21">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="196" mask="VXXXXXXX" item="Inv o21">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="196" mask="XXXXXVXX" item="Recip21"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="196" mask="XXXVVXXX" item="Eff21">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="196" mask="XXXXXXVV" item="EffDu21">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>

		<variable label="Element A Address" CV="197" mask="VVVVVVVV" item="Address 22A">
			<splitVal highCV="198" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="198" mask="XXVVXXXX" item="Message 22A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="198" mask="XVXXXXXX" item="State 22A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="199" mask="VVVVVVVV" item="Address 22B">
			<splitVal highCV="200" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="200" mask="XXVVXXXX" item="Message 22B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="200" mask="XVXXXXXX" item="State 22B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="200" mask="VXXXXXXX" item="Logic 22B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="201" mask="VVVVVVVV" item="Address 22C">
			<splitVal highCV="202" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="202" mask="XXVVXXXX" item="Message 22C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="202" mask="XVXXXXXX" item="State 22C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="202" mask="VXXXXXXX" item="Logic 22C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="203" mask="XVVXXXXX" item="BiC22">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="203" mask="VXXXXXXX" item="Inv o22">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="203" mask="XXXXXVXX" item="Recip22"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="203" mask="XXXVVXXX" item="Eff22">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="203" mask="XXXXXXVV" item="EffDu22">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>

		<variable label="Element A Address" CV="204" mask="VVVVVVVV" item="Address 23A">
			<splitVal highCV="205" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="205" mask="XXVVXXXX" item="Message 23A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="205" mask="XVXXXXXX" item="State 23A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="206" mask="VVVVVVVV" item="Address 23B">
			<splitVal highCV="207" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="207" mask="XXVVXXXX" item="Message 23B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="207" mask="XVXXXXXX" item="State 23B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="207" mask="VXXXXXXX" item="Logic 23B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="208" mask="VVVVVVVV" item="Address 23C">
			<splitVal highCV="209" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="209" mask="XXVVXXXX" item="Message 23C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="209" mask="XVXXXXXX" item="State 23C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="209" mask="VXXXXXXX" item="Logic 23C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="210" mask="XVVXXXXX" item="BiC23">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="210" mask="VXXXXXXX" item="Inv o23">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="210" mask="XXXXXVXX" item="Recip23"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="210" mask="XXXVVXXX" item="Eff23">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="210" mask="XXXXXXVV" item="EffDu23">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>

		<variable label="Element A Address" CV="211" mask="VVVVVVVV" item="Address 24A">
			<splitVal highCV="212" upperMask="XXXXVVVV"/>
			</variable>	
		<variable label="Message Type " CV="212" mask="XXVVXXXX" item="Message 24A">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="212" mask="XVXXXXXX" item="State 24A">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Element B Address" CV="213" mask="VVVVVVVV" item="Address 24B">
			<splitVal highCV="214" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="214" mask="XXVVXXXX" item="Message 24B">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="214" mask="XVXXXXXX" item="State 24B">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="214" mask="VXXXXXXX" item="Logic 24B">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>
		<variable label="Element C Address" CV="215" mask="VVVVVVVV" item="Address 24C">
			<splitVal highCV="216" upperMask="XXXXVVVV"/>
			</variable>
		<variable label="Message Type " CV="216" mask="XXVVXXXX" item="Message 24C">
			<enumVal> <enumChoice choice="Switch Request"/> <enumChoice choice="Switch Feedback"/>
				<enumChoice choice="Sensor Message"/> </enumVal>
			</variable>
		<variable label="State" CV="216" mask="XVXXXXXX" item="State 24C">
			<enumVal> <enumChoice choice="False (Throw or Low)"/> <enumChoice choice="True (Close or Hi)"/> </enumVal>
			</variable>
		<variable label="Logic" CV="216" mask="VXXXXXXX" item="Logic 24C">
			<enumVal> <enumChoice choice="OR"/> <enumChoice choice="AND"/> </enumVal>
			</variable>

		<variable label="Bi-Color" CV="217" mask="XVVXXXXX" item="BiC24">
			<enumVal> <enumChoice choice="None" value="0"/> <enumChoice choice="Phase 1" value="1"/>
				<enumChoice choice="Phase 2" value="3"/> </enumVal> </variable>
		<variable label="Invert State" CV="217" mask="VXXXXXXX" item="Inv o24">
			<enumVal> <enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Reciprocal" CV="217" mask="XXXXXVXX" item="Recip24"> <enumVal> 
			<enumChoice choice="No"/> <enumChoice choice="Yes"/> </enumVal> </variable>
		<variable label="Effect" CV="217" mask="XXXVVXXX" item="Eff24">
			<enumVal> <enumChoice choice="None"/> <enumChoice choice="Delay"/>
				<enumChoice choice="Flash"/> <enumChoice choice="Dynamic Flash"/> </enumVal> </variable>
		<variable label="Effect Duration" CV="217" mask="XXXXXXVV" item="EffDu24">
			<enumVal> <enumChoice choice="5 Sec Delay/.5 Sec Flash"/> <enumChoice choice="10 Sec Delay/1 Sec Flash"/>
				<enumChoice choice="20 Sec Delay/2 Sec Flash"/> <enumChoice choice="40 Sec Delay/4 Sec Flash"/> </enumVal> </variable>

   </variables>
	
</decoder>


<pane name="Basic">
		<column>
			<label label="------  Output Addresses  ------ "/>
			<label label=" "/>
			<row>	
			<column> <display item="Output Addresses"/> </column>
			<column> <display item="through"/> </column>
				</row>
			<label label=" "/>
			<label label=" "/>
			<label label="------  Configuration  ------ "/>
			<label label=" "/>
			<display item="Op1" tooltip="Required for ops mode" format="checkbox" />
			<label label="Enables ops mode"/>
			<display item="Op2" tooltip="This option inhibits option 3" format="checkbox" />
			<label label="Disables sending of output state messages"/>
			<display item="Op3" tooltip="Enables SE8C signal message control" format="checkbox" />
			<label label="Enables SE8C signal message control"/>
			<display item="Op4" tooltip="This does not effect output control of the logic cells" format="checkbox" />
			<label label="Enables use of common cathode LEDs with Smart programmming"/>
			<label label=" "/>
			<label label=" "/>
			<label label="------  Special Functions  ------ "/>
			<label label=" "/>
			<display item="SE8C address factor" tooltip="Range 0-23" />
			<label label=" "/>
			<dccaddress />
			<label label="DO NOT enter a value in the Active DCC Address field "/>
			<label label=" "/>
			<display item="Ops Mode Address" tooltip="Sets the Ops Mode address" />
			<label label="Use ONLY the Ops Mode Address field for the DCC address"/>
			<label label=" "/>
			<label label=" "/>
			<label label=" "/>
			<label label=" "/>
			<label label="------  Notes:  ------ "/>
			<label label="The Custom Programmer format is recommended"/>
			<label label="SIC24 software version 13 or later required for DecoderPro"/>
	
		</column>
</pane>

<pane name="Mfg">
	<column>
			<label label=" "/>
			<display item="Manufacturer"
				tooltip="The manufacturer's ID number (read only)" />
			<display item="Decoder Version"
				tooltip="The decoder version number (read only)" />
			<display item="Product number"
				tooltip="The decoder product number (if used) (read only)" />
	</column>
</pane>

<pane name="Inputs">
	<column>
		<label label=" "/>
		<label label="------  Input 1  ------ "/>
		<label label=" "/>
		<display item="Primary Address 1" tooltip="Determines the input addess" />
		<row>
		<column> <label label="             "/> </column>
		<column> <display item="Primary Type 1"  tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv P1" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Primary Transition 1" tooltip="Configures the input simulas" />
		<display item="Secondary Address 1" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="         "/> </column>
		<column> <display item="Secondary Type 1" tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv S1" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Secondary Transition 1" tooltip="Configures the input for specfic use" />
 		<label label=" "/>
 		<label label="------  Input 2  ------ "/>
 		<label label=" "/>
		<display item="Primary Address 2" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="             "/> </column>
		<column> <display item="Primary Type 2"  tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv P2" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Primary Transition 2" tooltip="Configures the input for specfic use" />
		<display item="Secondary Address 2" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="         "/> </column>
		<column> <display item="Secondary Type 2" tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv S2" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Secondary Transition 2" tooltip="Configures the input for specfic use" />
		<label label=" "/>
		<label label="------  Input 3  ------ "/>
		<label label=" "/>
		<display item="Primary Address 3" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="             "/> </column>
		<column> <display item="Primary Type 3"  tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv P3" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Primary Transition 3" tooltip="Configures the input for specfic use" />
		<display item="Secondary Address 3" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="         "/> </column>
		<column> <display item="Secondary Type 3" tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv S3" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Secondary Transition 3" tooltip="Configures the input for specfic use" />
		<label label=" "/>
		<label label="------  Input 4  ------ "/>
		<label label=" "/>
		<display item="Primary Address 4" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="             "/> </column>
		<column> <display item="Primary Type 4"  tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv P4" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Primary Transition 4" tooltip="Configures the input for specfic use" />
		<display item="Secondary Address 4" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="         "/> </column>
		<column> <display item="Secondary Type 4" tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv S4" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Secondary Transition 4" tooltip="Configures the input for specfic use" />
		<label label=" "/>
			</column>
	<column>
		<label label=" "/>
		<label label="------  Input 5  ------ "/>
		<label label=" "/>
		<display item="Primary Address 5" tooltip="Determines the input addess" />
		<row>
		<column> <label label="             "/> </column>
		<column> <display item="Primary Type 5"  tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv P5" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Primary Transition 5" tooltip="Configures the input simulas" />
		<display item="Secondary Address 5" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="         "/> </column>
		<column> <display item="Secondary Type 5" tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv S5" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Secondary Transition 5" tooltip="Configures the input for specfic use" />
 		<label label=" "/>
 		<label label="------  Input 6  ------ "/>
 		<label label=" "/>
		<display item="Primary Address 6" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="             "/> </column>
		<column> <display item="Primary Type 6"  tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv P6" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Primary Transition 6" tooltip="Configures the input for specfic use" />
		<display item="Secondary Address 6" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="         "/> </column>
		<column> <display item="Secondary Type 6" tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv S6" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Secondary Transition 6" tooltip="Configures the input for specfic use" />
		<label label=" "/>
		<label label="------  Input 7  ------ "/>
		<label label=" "/>
		<display item="Primary Address 7" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="             "/> </column>
		<column> <display item="Primary Type 7"  tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv P7" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Primary Transition 7" tooltip="Configures the input for specfic use" />
		<display item="Secondary Address 7" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="         "/> </column>
		<column> <display item="Secondary Type 7" tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv S7" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Secondary Transition 7" tooltip="Configures the input for specfic use" />
		<label label=" "/>
		<label label="------  Input 8  ------ "/>
		<label label=" "/>
		<display item="Primary Address 8" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="             "/> </column>
		<column> <display item="Primary Type 8"  tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv P8" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Primary Transition 8" tooltip="Configures the input for specfic use" />
		<display item="Secondary Address 8" tooltip="Configures the input for specfic use" />
		<row>
		<column> <label label="         "/> </column>
		<column> <display item="Secondary Type 8" tooltip="Configures the input for specfic use" /> </column>
		<column> <display item="Inv S8" format="checkbox"  tooltip="Inverts the normal state of True (close or hi) when input goes hi" /> </column>
			</row>
		<display item="Secondary Transition 8" tooltip="Configures the input for specfic use" />
		<label label=" "/>
		
	</column>
</pane>


<pane name="Outputs 1-8">
		<column>
		<label label=" "/>
		<label label="------ Logic combination reference table for elements B and C ------"/>
		<label label=" "/>
		<row>
		<separator/>
		<column>
			<separator/> <label label="Logic Combination"/> <separator/>
			<label label="A OR B OR C "/> <separator/>
			<label label="(A OR B) AND C "/> <separator/>
			<label label="(A AND B) OR C "/> <separator/>
			<label label="A AND B AND C "/> <separator/>
				</column>
				<separator/>
		<column>
			<separator/> <label label=" B Logic "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
			<label label=" AND "/> <separator/>
				</column>
				<separator/>
		<column>
			<separator/> <label label=" C Logic"/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
				</column>
				<separator/>
		</row>
	<row>
	<column>
		<label label=" "/>
		<label label="------ Logic Cell 1 ------ "/>
		<label label=" "/>
		<display item="Address 1A" />
		<display item="Message 1A" />
		<display item="State 1A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 1B" /> </column>
		<column> <display item="Logic 1B" /> </column>
			</row>
		<display item="Message 1B" />
		<display item="State 1B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 1C" /> </column>
		<column> <display item="Logic 1C" /> </column>
			</row>
		<display item="Message 1C" />
		<display item="State 1C"/>
		<label label=" "/>
		<label label="Output 1 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o1" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC1" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip1" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff1" tooltip="Configures the output for specfic effect" />
		<display item="EffDu1" tooltip="Time is based on the type of effect" />
		
			<label label=" "/>
		<label label="------ Logic Cell 2 ------"/>
		<label label=" "/>
		<display item="Address 2A" />
		<display item="Message 2A" />
		<display item="State 2A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 2B" /> </column>
		<column> <display item="Logic 2B" /> </column>
			</row>
		<display item="Message 2B" />
		<display item="State 2B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 2C" /> </column>
		<column> <display item="Logic 2C" /> </column>
			</row>
		<display item="Message 2C" />
		<display item="State 2C"/>
		<label label=" "/>
		<label label="Output 2 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o2" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC2" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip2" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff2" tooltip="Configures the output for specfic effect" />
		<display item="EffDu2" tooltip="Time is based on the type of effect" />
		
		<label label=" "/>
		<label label="------ Logic Cell 3 ------"/>
		<label label=" "/>
		<display item="Address 3A" />
		<display item="Message 3A" />
		<display item="State 3A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 3B" /> </column>
		<column> <display item="Logic 3B" /> </column>
			</row>
		<display item="Message 3B" />
		<display item="State 3B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 3C" /> </column>
		<column> <display item="Logic 3C" /> </column>
			</row>
		<display item="Message 3C" />
		<display item="State 3C"/>
		<label label=" "/>
		<label label="Output 3 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o3" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC3" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip3" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff3" tooltip="Configures the output for specfic effect" />
		<display item="EffDu3" tooltip="Time is based on the type of effect" />
		
		<label label=" "/>
		<label label="------ Logic Cell 4 ------ "/>
		<label label=" "/>
		<display item="Address 4A" />
		<display item="Message 4A" />
		<display item="State 4A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 4B" /> </column>
		<column> <display item="Logic 4B" /> </column>
			</row>
		<display item="Message 4B" />
		<display item="State 4B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 4C" /> </column>
		<column> <display item="Logic 4C" /> </column>
			</row>
		<display item="Message 4C" />
		<display item="State 4C"/>
		<label label=" "/>
		<label label="Output 4 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o4" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC4" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip4" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff4" tooltip="Configures the output for specfic effect" />
		<display item="EffDu4" tooltip="Time is based on the type of effect" />
		<label label=" "/>
	</column>
	
	<column>
		<label label=" "/>
		<label label="------ Logic Cell 5 ------ "/>
		<label label=" "/>
		<display item="Address 5A" />
		<display item="Message 5A" />
		<display item="State 5A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 5B" /> </column>
		<column> <display item="Logic 5B" /> </column>
			</row>
		<display item="Message 5B" />
		<display item="State 5B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 5C" /> </column>
		<column> <display item="Logic 5C" /> </column>
			</row>
		<display item="Message 5C" />
		<display item="State 5C"/>
		<label label=" "/>
		<label label="Output 5 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o5" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC5" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip5" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff5" tooltip="Configures the output for specfic effect" />
		<display item="EffDu5" tooltip="Time is based on the type of effect" />
		
		<label label=" "/>
		<label label="------ Logic Cell 6 ------"/>
		<label label=" "/>
		<display item="Address 6A" />
		<display item="Message 6A" />
		<display item="State 6A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 6B" /> </column>
		<column> <display item="Logic 6B" /> </column>
			</row>
		<display item="Message 6B" />
		<display item="State 6B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 6C" /> </column>
		<column> <display item="Logic 6C" /> </column>
			</row>
		<display item="Message 6C" />
		<display item="State 6C"/>
		<label label=" "/>
		<label label="Output 6 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o6" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC6" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip6" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff6" tooltip="Configures the output for specfic effect" />
		<display item="EffDu6" tooltip="Time is based on the type of effect" />
		
			<label label=" "/>
		<label label="------ Logic Cell 7 ------"/>
		<label label=" "/>
		<display item="Address 7A" />
		<display item="Message 7A" />
		<display item="State 7A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 7B" /> </column>
		<column> <display item="Logic 7B" /> </column>
			</row>
		<display item="Message 7B" />
		<display item="State 7B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 7C" /> </column>
		<column> <display item="Logic 7C" /> </column>
			</row>
		<display item="Message 7C" />
		<display item="State 7C"/>
		<label label=" "/>
		<label label="Output 7 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o7" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC7" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip7" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff7" tooltip="Configures the output for specfic effect" />
		<display item="EffDu7" tooltip="Time is based on the type of effect" />
		
			<label label=" "/>
		<label label="------ Logic Cell 8 ------"/>
		<label label=" "/>
		<display item="Address 8A" />
		<display item="Message 8A" />
		<display item="State 8A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 8B" /> </column>
		<column> <display item="Logic 8B" /> </column>
			</row>
		<display item="Message 8B" />
		<display item="State 8B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 8C" /> </column>
		<column> <display item="Logic 8C" /> </column>
			</row>
		<display item="Message 8C" />
		<display item="State 8C"/>
		<label label=" "/>
		<label label="Output 8 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o8" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC8" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip8" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff8" tooltip="Configures the output for specfic effect" />
		<display item="EffDu8" tooltip="Time is based on the type of effect" />
		<label label=" "/>
	</column>
	</row>
	</column>
</pane>

<pane name="Outputs 9-16">
		<column>
		<label label=" "/>
		<label label="------ Logic combination reference table for elements B and C ------"/>
		<label label=" "/>
		<row>
		<separator/>
		<column>
			<separator/> <label label="Logic Combination"/> <separator/>
			<label label="A OR B OR C "/> <separator/>
			<label label="(A OR B) AND C "/> <separator/>
			<label label="(A AND B) OR C "/> <separator/>
			<label label="A AND B AND C "/> <separator/>
				</column>
				<separator/>
		<column>
			<separator/> <label label=" B Logic "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
			<label label=" AND "/> <separator/>
				</column>
				<separator/>
		<column>
			<separator/> <label label=" C Logic"/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
				</column>
				<separator/>
		</row>
	<row>
	<column>
		<label label=" "/>
		<label label="------ Logic Cell 9 ------ "/>
		<label label=" "/>
		<display item="Address 9A" />
		<display item="Message 9A" />
		<display item="State 9A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 9B" /> </column>
		<column> <display item="Logic 9B" /> </column>
			</row>
		<display item="Message 9B" />
		<display item="State 9B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 9C" /> </column>
		<column> <display item="Logic 9C" /> </column>
			</row>
		<display item="Message 9C" />
		<display item="State 9C"/>
		<label label=" "/>
		<label label="Output 9 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o9" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC9" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip9" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff9" tooltip="Configures the output for specfic effect" />
		<display item="EffDu9" tooltip="Time is based on the type of effect" />
		
			<label label=" "/>
		<label label="------ Logic Cell 10 ------"/>
		<label label=" "/>
		<display item="Address 10A" />
		<display item="Message 10A" />
		<display item="State 10A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 10B" /> </column>
		<column> <display item="Logic 10B" /> </column>
			</row>
		<display item="Message 10B" />
		<display item="State 10B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 10C" /> </column>
		<column> <display item="Logic 10C" /> </column>
			</row>
		<display item="Message 10C" />
		<display item="State 10C"/>
		<label label=" "/>
		<label label="Output 10 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o10" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC10" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip10" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff10" tooltip="Configures the output for specfic effect" />
		<display item="EffDu10" tooltip="Time is based on the type of effect" />
		
		<label label=" "/>
		<label label="------ Logic Cell 11 ------"/>
		<label label=" "/>
		<display item="Address 11A" />
		<display item="Message 11A" />
		<display item="State 11A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 11B" /> </column>
		<column> <display item="Logic 11B" /> </column>
			</row>
		<display item="Message 11B" />
		<display item="State 11B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 11C" /> </column>
		<column> <display item="Logic 11C" /> </column>
			</row>
		<display item="Message 11C" />
		<display item="State 11C"/>
		<label label=" "/>
		<label label="Output 11 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o11" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC11" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip11" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff11" tooltip="Configures the output for specfic effect" />
		<display item="EffDu11" tooltip="Time is based on the type of effect" />
		
		<label label=" "/>
		<label label="------ Logic Cell 12 ------ "/>
		<label label=" "/>
		<display item="Address 12A" />
		<display item="Message 12A" />
		<display item="State 12A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 12B" /> </column>
		<column> <display item="Logic 12B" /> </column>
			</row>
		<display item="Message 12B" />
		<display item="State 12B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 12C" /> </column>
		<column> <display item="Logic 12C" /> </column>
			</row>
		<display item="Message 12C" />
		<display item="State 12C"/>
		<label label=" "/>
		<label label="Output 12 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o12" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC12" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip12" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff12" tooltip="Configures the output for specfic effect" />
		<display item="EffDu12" tooltip="Time is based on the type of effect" />
		<label label=" "/>
	</column>
	
	<column>
		<label label=" "/>
		<label label="------ Logic Cell 13 ------ "/>
		<label label=" "/>
		<display item="Address 13A" />
		<display item="Message 13A" />
		<display item="State 13A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 13B" /> </column>
		<column> <display item="Logic 13B" /> </column>
			</row>
		<display item="Message 13B" />
		<display item="State 13B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 13C" /> </column>
		<column> <display item="Logic 13C" /> </column>
			</row>
		<display item="Message 13C" />
		<display item="State 13C"/>
		<label label=" "/>
		<label label="Output 13 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o13" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC13" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip13" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff13" tooltip="Configures the output for specfic effect" />
		<display item="EffDu13" tooltip="Time is based on the type of effect" />
		
		<label label=" "/>
		<label label="------ Logic Cell 14 ------"/>
		<label label=" "/>
		<display item="Address 14A" />
		<display item="Message 14A" />
		<display item="State 14A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 14B" /> </column>
		<column> <display item="Logic 14B" /> </column>
			</row>
		<display item="Message 14B" />
		<display item="State 14B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 14C" /> </column>
		<column> <display item="Logic 14C" /> </column>
			</row>
		<display item="Message 14C" />
		<display item="State 14C"/>
		<label label=" "/>
		<label label="Output 14 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o14" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC14" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip14" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff14" tooltip="Configures the output for specfic effect" />
		<display item="EffDu14" tooltip="Time is based on the type of effect" />
		
			<label label=" "/>
		<label label="------ Logic Cell 15 ------"/>
		<label label=" "/>
		<display item="Address 15A" />
		<display item="Message 15A" />
		<display item="State 15A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 15B" /> </column>
		<column> <display item="Logic 15B" /> </column>
			</row>
		<display item="Message 15B" />
		<display item="State 15B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 15C" /> </column>
		<column> <display item="Logic 15C" /> </column>
			</row>
		<display item="Message 15C" />
		<display item="State 15C"/>
		<label label=" "/>
		<label label="Output 15 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o15" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC15" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip15" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff15" tooltip="Configures the output for specfic effect" />
		<display item="EffDu15" tooltip="Time is based on the type of effect" />
		
			<label label=" "/>
		<label label="------ Logic Cell 16 ------"/>
		<label label=" "/>
		<display item="Address 16A" />
		<display item="Message 16A" />
		<display item="State 16A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 16B" /> </column>
		<column> <display item="Logic 16B" /> </column>
			</row>
		<display item="Message 16B" />
		<display item="State 16B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 16C" /> </column>
		<column> <display item="Logic 16C" /> </column>
			</row>
		<display item="Message 16C" />
		<display item="State 16C"/>
		<label label=" "/>
		<label label="Output 16 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o16" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC16" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip16" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff16" tooltip="Configures the output for specfic effect" />
		<display item="EffDu16" tooltip="Time is based on the type of effect" />
		<label label=" "/>
	</column>
	</row>
	</column>
</pane>

<pane name="Outputs 17-24">
		<column>
		<label label=" "/>
		<label label="------ Logic combination reference table for elements B and C ------"/>
		<label label=" "/>
		<row>
		<separator/>
		<column>
			<separator/> <label label="Logic Combination"/> <separator/>
			<label label="A OR B OR C "/> <separator/>
			<label label="(A OR B) AND C "/> <separator/>
			<label label="(A AND B) OR C "/> <separator/>
			<label label="A AND B AND C "/> <separator/>
				</column>
				<separator/>
		<column>
			<separator/> <label label=" B Logic "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
			<label label=" AND "/> <separator/>
				</column>
				<separator/>
		<column>
			<separator/> <label label=" C Logic"/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
			<label label=" OR "/> <separator/>
			<label label=" AND "/> <separator/>
				</column>
				<separator/>
		</row>
	<row>
	<column>
		<label label=" "/>
		<label label="------ Logic Cell 17 ------ "/>
		<label label=" "/>
		<display item="Address 17A" />
		<display item="Message 17A" />
		<display item="State 17A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 17B" /> </column>
		<column> <display item="Logic 17B" /> </column>
			</row>
		<display item="Message 17B" />
		<display item="State 17B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 17C" /> </column>
		<column> <display item="Logic 17C" /> </column>
			</row>
		<display item="Message 17C" />
		<display item="State 17C"/>
		<label label=" "/>
		<label label="Output 17 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o17" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC17" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip17" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff17" tooltip="Configures the output for specfic effect" />
		<display item="EffDu17" tooltip="Time is based on the type of effect" />
		
			<label label=" "/>
		<label label="------ Logic Cell 18 ------"/>
		<label label=" "/>
		<display item="Address 18A" />
		<display item="Message 18A" />
		<display item="State 18A"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 18B" /> </column>
		<column> <display item="Logic 18B" /> </column>
			</row>
		<display item="Message 18B" />
		<display item="State 18B"/>
		<row>
		<column> <label label=" "/> </column>
		<column> <display item="Address 18C" /> </column>
		<column> <display item="Logic 18C" /> </column>
			</row>
		<display item="Message 18C" />
		<display item="State 18C"/>
		<label label=" "/>
		<label label="Output 18 Control ---"/>
		<row>
		<column> <label label="            "/> </column>
		<column> <display item="Inv o18" format="checkbox" tooltip="Use for common cathode type LEDs" /> </column>
		<column> <label label=" Do not use for Bi-Color LEDs"/> </column>
			</row>
		<display item="BiC18" tooltip="Use for two legged bi-color LEDs" />
		<row>
		<column> <label label="              "/> </column>
		<column> <display item="Recip18" format="checkbox" tooltip="Inverts the output state of the effect" /> </column>
		<column> <label label=" Use for alternating flashing LEDs"/> </column>
			</row>
		<display item="Eff18" tooltip="Configures the output for specfic effect" />
		<display item="EffDu18" tooltip="Time is based on the type of effect" />
		
		<label label=" "/>
		<label label="------ Logic Cell 19 ------"/>
		<la